• Phone : (+62(21) 39837477) - SMS/WA : (+628128034 1963, +6281 86 185 81)

PSM (Process Safety Management) Training

PSM (Process Safety Management) THREE DAYS – PUBLIC TRAINING,   
4-5 November 2021 


A PSM (process safety management) is a part of safety management and engineering system. The Process safety management system is introduced the first time as a regulation promulgated by the United States of America Occupational Safety and Health Administration (OSHA). This process is any activity or combination of activities including any use, storage, manufacturing, handling or the on-site movement of highly hazardous chemicals (HHCs) as defined by OSHA and the Environmental Protection Agency (EPA). The PSM system aims to ensure that technology facilities such as chemical plants, refineries, gas processing plants and offshore  drilling platforms and so high-risk industries have access  to safe design and operation. This system is focused on prevention of major technological accidents such as: fire, explosion and leakage of toxic chemicals. They also is a management control process that includes plans, procedures, audit and evaluation for handling hazardous substances, these controls will contribute to help for identify,  understand and control process hazards.

The process safety management system program could be divided into 14 elements. The OSHA 1910.119 formalize all 14 elements of the process safety management system plan. There are; Process Safety Information, Process Hazard Analysis , Operating Procedures, Training, Contractors , Mechanical Integrity,  Hot Work, Management of Change, Incident Investigation, Compliance Audits. All of those elements mentioned above are interlinked and interdependent. There is a enormous dependence of the numerous elements of PSM. The whole elements are complementary and are fundamental to make up the entire PSM system. Each element either gives information to other elements for the achievement or appropriate information from other elements in order to be concluded.

In term of Process Safety Information, the information pertaining to the hazards of the highly hazardous chemicals in the process should consist of at least the following; Toxicity information, Permissible, exposure limit, Physical data, Reactivity data, Corrosivity data, Thermal and chemical stability data, Hazardous effects of inadvertent mixing of different materials that could foreseeably occur.

The PSM (Process Safety Management) training is not provided for management and the employees and contractors under workers management procedures, this is an executive tools for everyone involved that is a part of HSE training series. All stakeholders such as; managers, employees and contractors workers are responsible for the successful implementation the PSM. This system is started early in design stage, but they continuously improvement as well as technology changes.



On Successful completion of this PSM (Process Safety Management) training program the participant will be able to:

  1. Learn the core concepts of fundamental Process Safety Management system & application in industry
  2. Understand how to modify & improve the existing Process Safety Management system without avoid the safety and business aspects
  3. Learn how implement the tools of cost effective system as a  basic to control production program
  4. Have a detailed knowledge of the optimization of safety practices,  in order to maximize facility and minimize risk with   identify,  understand and control process hazards.



  1. Safety Manager/Superintendent/Engineer/Planner/Supervisor
  2. Project, Maintenance Engineer
  3. Process & Manufacturing/Engineer
  4. Production Planner/Engineer/PPIC/Operation Engineer
  5. Professionals.



  1. Scale of Contractor Use
  2. Process safety culture and competency
  3. Process safety information (PSI)
  4. Process Hazard Analysis (PHA)
  5. Management of Change (MOC)
  6. Permit-to-work Procedures
  7. Emergency Planning & Response
  8. Compliance Audits
  9. Asset integrity and reliability
  10. Plan Maintenance & Operations
  11. Organising, Planning and Controlling for Start Up and Shut Down



  1. DATE : 15 – 17 June 2020
  2. TIME : 8.00 am – 4.00 pm
  3. VENUE : Bandung



  1.  24 – 26 August 2020, Jakarta
  2. 3 – 5 November 2020, Bandung



The Process Safety Management training fees is Rp. 7.750.000,- /delegate and including; lunch, training kit, 2 x Coffee break/day, Course certificate, excluding accommodation and Tax.

Image result for discount gif

  1. Discount 10% if send 4 participants
  2. Discount 2% if send 3 participants
  3. and 3 % early bird (Should be paid 2 week before the event)


For further information please contact:

  1. Tel: (62) (021) 39837475
  2. Fax: (62) (021) 398 37477
  3. Info 24/7  SMS or WA (62) (812 8034 1963) or (62) (8 186 185 81)


A process safety management is a part of  OSHA requirements as mentioned above, and the process safety management engineer will be certified by  IChemE in United States



  • Ir. Taruli Sibuea MSc

Qualification: Master of Science in Safety University of Winconsin –Stout, USA First degree (S1): Chemical Engineering, Bandung Institute of Technology (ITB). More than 25 years experience in Industry i.e: 8 (Eight) years as a Process Engineer that includes; Process Engineer in refinery & petrochemical plant PERTAMINA, Plaju. Serves as process adviser to refinery & petrochemical plants for effectiveness & efficiency of unit operations and in the last 16 (Sixteen) in several positions such as; Lead Safety Engineer & Loss Prevention & Environmental Affairs, Directorate of Processing PERTAMINA, Loss prevention advice to management, evaluate of emergency preparedness, monitor/perform incident investigation, reporting, record keeping and trend analysis, others. Instructor experience i.e: Several training related to HSE and Fire Protection. HAZOP Leader at PERTAMINA Blue Sky Program, Balongan, HAZOP Leader PERTAMINA LPG, Cilacap, HAZOP Facilitator CONOCO Phillips Facilities, Sumsel, MIGAS Instructor such as; Storage Tank Safety. Visitor Lecturer at Fakultas Kesehatan Masyarakat Universitas Indonesia in subject Safety Management.  Attended Course; Military Course, SESKO ABRI Bandung.

  • Ir. Alfino. Alwie M.Sc

Professional Experience: 11 (Eleven) Years experience in Aircraft industry that includes; Investigation of design for improved civil aircraft maintainability, high temperature oxidation alloys and on job training at several Europe companies, such as: Airbus Industry & Rolls Royce, Britania Airways. Last 16 (Sixteen) years in Oil & Gas, petrochemical industries i.e: PETRONAS, Trans Thailand Malaysia (TTM) for Process Safety Management training and review, Santos-Indonesia Process Safety Management Internal Audit, FPSO Belanak CONOCOPHILIPS, Unocal-West Seno, SAPI-HANOVER, TOTAL PECIKO 3-4, CNOOC especially in Safety Management System Review for certification purposes, as Independent Certification Team (ICT)-MIGAS and also active to develop Risk Based Inspection, Reliability Centered Maintenance and Risk Assessment such as: KONDUR PSA, RBUI-BP-Indonesia, CNOOC, EXXONMOBIL, BP-Sub marine Pipelines, PT PUPUK KALTIM Tbk, PT. Kaltim Pasifik Amoniak.  Qualification: Master degree from Cranfield University, UK especially in the field of Safety, Reliability, Availability and Maintainability, as a member Safety & Reliability Society & Institution Occupational, Safety & Health UK. Course attended: Advance Reliability Analysis (Cranfield School of Engineering, U.K), Certified Managing Safely by IOSH, U.K, others.


Process Safety Management Training-2019
The all participants in Process Safety Management Training in Bandung-2020


Process Safety Management Training
The all participants in Process Safety Management Training in Bandung-2019


Process Safety Management Training
The all participants in Process Safety Management Training in Bandung-2018



1 Comment

Leave a Reply

Your email address will not be published.


This site uses Akismet to reduce spam. Learn how your comment data is processed.